Dishwasher Repair — Book a Visit Today
Dishwashers fail quietly. You open the door expecting clean plates and get grit, cloudy film, or a puddle on the kitchen floor. Common culprits: a clogged sump or filter, a worn drain pump, a leaking door gasket, a heating element that quit, or a control board that stopped talking to the wash motor. Our visit starts with questions, then a look under the toe kick and inside the sump. We run a cycle when it's safe to, watch fill and drain, and check for leaks along the seams. Then we explain what we found in plain words before anything gets replaced. We work on all major brands as an independent shop. Call us and tell us what the machine is doing.
- Real person answers
- Open 7 days
- Written quotes
- A real person answers
- Open 7 days
- Written quote before work starts
Taking calls until 5:00 PM ET

The dishwasher symptoms we hear most
- There's water sitting in the bottom every morning Drain restriction, clogged filter or sump, failing drain pump, or a kinked drain hose
- Dishes come out gritty and still dirty Blocked spray arm jets, low water fill, worn wash pump, or a filter nobody has cleaned
- Puddle spreading across the floor after a cycle Door gasket wear, loose hose clamp, cracked sump, or an overfilling float switch
- Buttons light up but nothing happens Door latch switch, control board fault, or a thermal cutoff on the heating circuit
- It grinds and hums loud enough to hear upstairs Debris in the chopper area, worn pump bearings, or a spray arm hitting a rack
Safe things to check first
Worth a look before you call — sometimes it saves you the visit.
- 1Pull the bottom rack and lift out the cylinder filter to see if food, glass chips, or a label is packing it solid.
- 2Spin each spray arm by hand and hold a jet up to the light to spot plugged holes.
- 3Look under the sink for a kinked drain hose or a garburator knockout plug that was never punched out.
- 4Wipe the door gasket with a damp cloth and check for stiff, cracked, or folded-over spots that break the seal.
How it works
- Step 1
Tell us the symptom
Call us or fill out the form. Describe what you hear, smell or see. Grinding, leaking, no heat. Give us the brand and rough age if you can find the tag.
- Step 2
We book a window
Pick a visit time that fits your day. We ask about tight doorways, basement stairs and stacked units ahead of time, so the right tools come off the truck the first trip.
- Step 3
Diagnose, then repair
Our tech tests the machine, explains what failed in plain words, and lays out your options. Common parts ride along on the van. Ordered parts get scheduled for a prompt return.
- A real person answers
- Open 7 days
- Written quote before work starts
Dishwasher Repair — quick answers
Why does my dishwasher smell even after a hot cycle?
Odor usually comes from trapped food in the filter, sump, or drain hose. Standing water makes it worse. Clean the filter and run an empty hot cycle. If the smell returns quickly, something is holding water where it shouldn't.
Is a leaking dishwasher worth repairing?
Often yes. Many leaks trace to a gasket, hose clamp, or loose fitting rather than the tub itself. We find the source first. If the tub is cracked or the frame is rusted through, we tell you straight so you can decide.
How long does a repair visit usually take?
Most visits run about an hour once we're at the machine. Diagnosis takes the first stretch, then the repair itself. If a part has to be ordered, we secure the machine, explain the timeline, and set a return.
Do I need to pull the dishwasher out of the cabinet?
No. Leave it be. We handle removal and reinstall when access requires it. Just clear the front, unload the racks, and move any mats or trash cans so we can lay a towel and work.
Can you work on a dishwasher in a tight galley kitchen?
Yes. Narrow rowhome kitchens are routine for us. We work with the door swing you have and protect the flooring. Clearing the counter beside the unit and the walkway behind us helps things move faster.
Do you service all brands?
We repair all major residential dishwasher brands as an independent company. Tell us the brand and, if you can find it, the model number on the door edge or tub rim. That helps us bring the right parts along.
How it works
- Step 1
Tell us the symptom
Call us or fill out the form. Describe what you hear, smell or see. Grinding, leaking, no heat. Give us the brand and rough age if you can find the tag.
- Step 2
We book a window
Pick a visit time that fits your day. We ask about tight doorways, basement stairs and stacked units ahead of time, so the right tools come off the truck the first trip.
- Step 3
Diagnose, then repair
Our tech tests the machine, explains what failed in plain words, and lays out your options. Common parts ride along on the van. Ordered parts get scheduled for a prompt return.
- A real person answers
- Open 7 days
- Written quote before work starts
Questions worth asking any repair company
Ask these of anyone you let into your home — us included. Call and we'll answer all five before you book anything.
- 1Ask for their license numberThen verify it with your state licensing board rather than taking it on trust.
- 2Ask for proof of insuranceLiability cover protects you if something goes wrong in your home.
- 3Get the quote in writingIncluding the trip fee, whether it's credited against the repair, and parts.
- 4Ask how they handle callbacksIf the same fault returns, what happens? Get the answer before work begins.
- 5Check their own reviewsLook the business up independently — their Google profile, not just what they tell you.
Why homeowners call us
- Built for local kitchensNorristown is home base. We know Philly rowhome galleys where the fridge barely clears the cabinet, and 1960s split-levels with laundry tucked behind a furnace. Cramped spaces don't slow the repair down.
- Independent, not a dealerWe work for you, not a manufacturer. That means straight talk about whether a machine is worth fixing or nearing the end. No script, no upsell pressure, no pushing you toward a showroom floor.
- Wide brand experienceRefrigerators, washers, dryers, dishwashers, ranges, wall ovens, cooktops. Front-load or top-load, gas or electric, older workhorses and newer boards. We keep up with common failure patterns across the major brands.
- Clear communicationYou hear what part failed and why. We show the worn belt or the cracked pump housing. Floors get covered, cabinets stay protected, and we haul the old parts out with us when we go.
- All major brands, gas & electricWhirlpool, Samsung, LG, GE, Maytag, Bosch, KitchenAid and more — as an independent repair company.
- Straight answersIf it isn't worth repairing, we'll say so — often on the phone.
Dishwasher Repair
Small faults become big ones on a schedule of their own
Describe the symptoms and we'll book the visit — takes about a minute.
- A real person answers
- Open 7 days
- Written quotes
- All major brands
- Gas & electric
Rather not call? Get a free quote →